Available for download on Thingiverse. And coming to the Makersteve Store on eBay and Etsy There is a ton of other useful stuff on Makersteve.com and more coming every week. Be sure to check out my Ultimate Build Guide for Creality Ender 3 If you find this useful, please consider purchasing products through any […]
The saga continues. In the previous episode I covered how to stabilize your print bed. Determined in my quest to solve why Ender Alpha can’t print and then print again without adjustment I believe I have found the source of my problem. My gantry seems to sag a bit. For those unfamiliar, the gantry is […]
8/13/2019 – USED ENDER Printers back in stock! I’ve 8/13/2019 – USED ENDER Printers back in stock! I’ve bought 3.. they help you fix ’em! Ender 3 Pro $185.00 OBO! Ender 3 $155.00 OBO! Ender 5 $249.00 OBO! CR-10 259.00 OBO! REPLACE those bad XT60 Connectors before your Ender 3 catches fire! https://makersteve.com/2019/04/16/safety-first-replace-those-bad-xt60-connectors-ender-3-fix/ See how I stencil! https://makersteve.com/2019/04/16/up-your-3d-printing-game-with-stencils-and-a-vinyl-cutter-go-cricut-go/ […]
One of the best printing filaments at $13.99 a roll. This is a steal of a deal! https://amzn.to/2QiWkYA Get some!
See it here: https://www.thingiverse.com/thing:3124568 or buy one on eBay! Finish them in accordance with Makersteve’s instructions located here: https://makersteve.com/2018/03/26/finishing-your-3d-printed-105mm-artillery-shell-piggy-bank/ If you are new to 3D printing or have a CR-10 and want to pep it up, check my about page in my profile.. lots of good info there. I work for tips and you all don’t tip […]
See how I stencil! https://makersteve.com/2019/04/16/up-your-3d-printing-game-with-stencils-and-a-vinyl-cutter-go-cricut-go/ Upfront, I owe you a video but I only have two hands. This will get you going while I get you more data. Hydro-dipping is a great way to finish your 3D Prints. It’s a relatively simple process that can add great effects to any project you are working on. […]
I was missing a few 1/2 inch wood plugs for the old Futon so I ginned these up. They will work fine for anything 1/2 inch. Great for wood working. Since my Shelf pegs (https://www.thingiverse.com/thing:2669456, https://www.thingiverse.com/thing:2669397) were a hit, I figure these would be well received also. I suggest .2mm for the print and a little […]
We are diversifying.. Artillery shells are great but people like tank rounds also. If you have a 105mm Shell casing laying around, this will look pretty good in it. If you have a 3D Printer you can make your own! https://www.thingiverse.com/thing:3119771 Plenty more coming.. Enjoy, Steve
Behold! The ArtillerLamp Family! See What’s For Sale at MakerSteve.com 155mm, 105mm and 75mm ArtillerLamps. Collect them All!!! There is a ton of other useful stuff on Makersteve.com and more coming every week. Be sure to check out my Ultimate Build Guide for Creality Ender 3 If you find this useful, please consider purchasing products through […]
I have been having problems with my Ender 3’s and support material getting stuck to the print. Almost to the point of being part of the print. I have been able to remove the support material by picking at it with dental picks, awls and various other cutting devices. I usually end up digging them […]
