Help! I have a glob of filament stuck to my hotend.

This happens infrequently these days but it does happen.  If it happens to me, it is probably going to happen to someone starting out.  Here is a walk-through on how to clear your hotend that has a blob, glob, mass, molten ball of plastic or whatever you might call it. This process will help you […]

Replace your Sticker Build Surface with something else!

Sticker Polycarbonate, Magnetic or Borosilicate   The fixed build surface is a pain when your print gets stuck to it. Here we are going to look at a couple options and upgrade to a Magnetic Build Plate. 24V Replacement Hot Plate for Ender 3, Ender 3 Pro, CR-20 – https://ebay.to/2TuVdaL 12V Replacement Hot Plate for […]

Brace yourself! CR-10S / CR-10 Support Rod Installation.

8/13/2019  – USED ENDER Printers back in stock!  I’ve bought 3.. they help you fix ’em! Ender 3 Pro  $185.00 OBO! Ender 3 $155.00 OBO! Ender 5 $249.00 OBO! CR-10 259.00 OBO! Watch Makersteve.com Episode 1! on Youtube showing the difference between the new support rod system and Frame Braces for Imagine That Titian, Creality CR-10, and Afinibot A31 […]

Ultimate Build Guide for Creality CR-10S / CR-10 – Step by Step – A MakerSteve Special Report

8/13/2019  – USED ENDER Printers back in stock!  I’ve bought 3.. they help you fix ’em! Ender 3 Pro  $185.00 OBO! Ender 3 $155.00 OBO! Ender 5 $249.00 OBO! CR-10 259.00 OBO! I just completed a video on CR-10 Support Rod features and a Step-by- Step how-to guide … Check it out.. If you like what I am doing, […]

Finishing your Whiskey Stash V2 – The King of Bottle!

You may also be interested this post if you have time.. it will be helpful Maker Steve’s 3D Printing Rules to successful 3D Prints Be sure to enter win the Whiskey Stash Giveaway for September 2018. You could win a free 3D Printed Whiskey Stash 105mm Howitzer Shell – Replica! Using your highly modified Creality […]

Getting your print to stick on your 3D Printer

Getting good adhesion… Setup and Maintenance …on your printing surface can be a challenge, especially when you are just starting out. Of course, your print isn’t going to stick if the surface is not level. I initially used tape and glue stick which works well most of the time, but I was replacing tape constantly […]